| Certificate No. UE/SLI/000178.0/24 |
Calibration Date : 01-05-2023 Certificate Date : 01-01-1970 Recommended Calibration Due Date : 01-11-2023 |
|
Nomenclature : BLOOD BANK REFRIGERATOR Location : BLOOD CENTRE User ID : ABC1 Make : XYZ1 Sr.No. : 1111 Equipment Range : From: 0 °C To: RT Operating Range : From: 2 °C To: 6 °C Discipline : THERMAL Parameter : TEMPERATURE Date of Receipt : 01-05-2023 Status of Equipment on receipt : WORKING Extra Attribute : Extra Attribute : Environmental conditionsAmbient Temp. : 25±4°C Relative Humidity : 70%RH Calibrated ' At Site ' at Customers address |
STANDARD USED1) Name : DIGITAL HUMIDITY INDICATOR Make/Model : MAXTECH Cal At : ERTL, MUMBAI Sr No : UE/CS/A/STD/04 Cal Date : 27-05-2022 Valid upto : 27-05-2023 Cert No. 2022TNP47 2) Name :MULTIFUNCTION CALIBRATOR Make/Model : FLUKE Cal At : IDEMI, MUMBAI Sr No : UE/CS/A/STD 01 Cal Date : 18-05-2022 Valid upto : 17-05-2023 Cert No. CC/ECL/0227/22-23 3) Name :PT-100 SENSOR WITH TIC Make/Model : UDHYAMSHRI Cal At :IDEMI, MUMBAI Sr No :UE/CS/A/TSD/01 Cal Date :13-05-2022 Valid upto : 12-05-2023 Cert No. CC/TRL/0039/22-23 4) Name :PT-100 SENSOR WITH TIC Make/Model : UDHYAMSHRI Cal At :IDEMI, MUMBAI Sr No :UE/CS/A/TSD/01 Cal Date :13-05-2022 Valid upto : 12-05-2023 Cert No. CC/TRL/0039/22-23 5) Name :PT-100 SENSOR WITH TIC Make/Model : UDHYAMSHRI Cal At :IDEMI, MUMBAI Sr No :UE/CS/A/TSD/01 Cal Date :13-05-2022 Valid upto : 12-05-2023 Cert No. CC/TRL/0039/22-23 * All master calibrator calibration certificates are traceable to National standards with unbroken chain. Calibration Procedure No.:UE-SOP-T-001 |
Observations
| Sr. No. | DUC Reading (°C) | Mean Standard Reading (°C) | Uncertainty (±) (°C) |
|---|---|---|---|
| 1 | 4.2 | 4.42 | 0.26 |
| 2 | 3.15 | 3.50 | 0.26 |
| 3 | 5.23 | 5.44 | 0.26 |
| 4 | 4.25 | 4.41 | 0.25 |
| 5 | 5.62 | 5.46 | 0.25 |
| 6 | 4.2 | 4.42 | 0.26 |
| 7 | 3.15 | 3.50 | 0.26 |
| 8 | 5.23 | 5.44 | 0.26 |
| 9 | 4.25 | 4.41 | 0.25 |
| 10 | 5.62 | 5.46 | 0.25 |
DUC = Device Under Calibration
(Uncertainty of the measurement is stated in the result at 95% Confidence Level for k=1.96)
| Status of the equipment after calibration : | REFER TO CHART : |
| Witnessed By : | TECHNICIAN ON DUTY : |
|
Technician | Approved By (S.D. Kulkarni) |
Seal |
- * This certificate refers only to the item calibrated and shall not be reproduced except in full, without our written permission.
- * The ˜Mean Reading" stated in the certificate is mean of all readings taken of that particular parameter value.
- * Results reported are valid at the time of calibration done and under the conditions stated as above.
- * The calibration results are applicable only to those items which have been calibrated and do not apply to any other items even though declared to be similar/ identical. The present equipment is calibrated for temperature parameter only.
- * We will not be liable for any change in calibration data & performance specification on account of malfunctioning of standard / instrument / equipment due to any damage caused to it after the report, in respect of it being issued.
- * Any anomalies/discrepancies in the report should be brought to our notice within 30 days from the report issue date.
- * All calculations & expressions used to generate this report uses SI / derived unit.
- * Any handwritten / corrected matter on this document is not authenticated
| Page 1 0f 1 |